====== Setting The Gap ======

Height gauge = 5.96mm +/- 0.02mm

What limits precision?
  * Slight amount of play in measurement based on how tight you adjust the mic.

Initial mic settings

A = 8.18mm +/- 0.03mm
B = 10.50mm +/- 0.03mm
C = 9.37mm +/- 0.03mm

What limits precision?
  * Adjusting one mic changes the height of the plate at the other two positions.
  * Judging exactly when contact is made.

====== Force Measurement ======

HV = 1450V

^ Force  ^ A     ^ B     ^ C     ^
| -0.35  | 8.17  | 9.50  | 9.38  |
|        |       |       |       |